Uploud:
ID:
Size:
Width: Px
Height: Px
Source:

The initial steps of tuft-setting are the same as for burling: secure matching yarn and remove the damage pile yarns to create a bare area. After that apply a clear-drying, latex-based seam cement on the bare spot with an absorbent cotton swab. You will nowadays need a tuft-setting tool, but once this is not available, a thin finger nail punch or a thin slash nail may be substituted. Position a loop of the wool in one end of the simple area and insert the tool against the U-shaped underlying part portion of the loop. Get this U-loop portion in the carpet backing with a incredibly light tap of a hammer against the top of the tool. Prevent a heavy blow, since this may force the pile tuft through the fabric. Even worse, a powerful blow can distort the backing into an increased hole that would prevent the common tension in the backing via holding the replaced yarn in the carpet.

Image Editor

Cfcpoland-

You can edit this image using this Cfcpoland Tool before save to your device

You May Also Like